VisionSC Range

VisionSC-DP2

Two independent DisplayPort1.2 capture channels

Eight lane PCIe Gen.3 interface, Net 6.4 GB/s total capture bandwidth

Frame buffer memory - 768 MB

HDCP support with Datapath graphics cards

Up to 8k x 8k capture resolution*

VisionSC-SDI4

Four independent 3G SDI capture channels

Four channels of 1920x1080p 60fps capture

Eight lane PCIe Gen.3 interface

Frame buffer memory - 768 MB

Single PCIe endpoint, allowing for more cards & captures to be placed within a single system

VisionSC-HD4+

Four independent HDMI 1.4 capture channels

2x297 Mhz channels offering 3840x2160p at 30 fps

2x165 Mhz channels offering 1920x1080p at 60 fps

Support for HDCP

VisionAV Range

VisionHD4

Eight Lane PCI Express Gen.3 bus

3.2 GB/s total capture bandwidth in four PCIe lanes Gen.3 or 8 lanes Gen. 2

Frame buffer memory 4x256 MB

HDCP supported when used with Datapath graphics cards

VisionAV-SDI

Four lane PCIe lane bus, Net 1.6 GB/s total capture bandwidth

Triple channel PCI Express capture card

Channel 1 - a High Definition DVI-I capture channel:

HDMI embedded audio capture and streaming

Low input to output capture latency

HDMI / DVI / TGB / YPbPr video capture

Channel 2 - a Standard Definition Composite capture channel:

PAL, NTSC, SECAM up to 720x576 at 16 Bit colour

Download Datasheet

Channel 3 - a SDI capture channel:

Single channel 3G / HD / SD-SDI capture card

SDI embedded audio capture and streaming

Loop through SDI BNC connection

Input status indicator lights

VisionAV-HD

Four lane PCIe lane bus, Net 1.6 GB/s total capture bandwidth

Triple channel PCI Express capture card

Two DVI-I capture channels:

HDMI embedded audio capture and streaming

Low input to output capture latency

HDMI / DVI / TGB / YPbPr video capture

SD/ Composite capture channels

PAL, NTSC, SECAM up to 720x576 at 16 Bit colour

Direct DMA to graphics memory of third party graphics cards

VisionAV

HDMI, DVI, RGB, YPbPr, composite video and analogue audio capture

Dual Channel Video

Channel 1 - HDMI, DVI, RGB, YPbPr digital or analogue HD video

Channel 2 - Composite video - NTSC, SECAM and PAL

Flexible Audio Capture

Balanced (XLR) and Unbalances (RCA) from an optional module

HDMI audio through HD video channel

Vision Range

VisionRGB-E1S

Single channel RGB/DVI/HD video capture card

Four Lane PCI Express interface with a maximum data rate of 650 MB/sec

Maximum analog RGB video capture resolution of 2048x1536 x24bit

Maximum DVI capture resolution of 1920x1200 x24bit

HD modes using the supplied DVI/ Component Adapter or DVI/HDMI Adapter (HDCP not supported)

On card processor for real time mode and sink detection

Support for YUV 4:2:2, RGB 5:5:5, 5:6:5 and 8:8:8 video formats

High performance DMA to system memory or direct to graphics memory with scatter gather

Support for separate H/V sync, Composite sink or sink on Green 16 cropping windows per capture channel

Includes WDM streaming drivers and the Datapath Vision application software

Fully integrated with the Datapath WallControl-red software for video wall applications

Datapath SDK included for software developers

VisionRGB-E2S

High performance DMA to system memory or direct to graphics memory with scatter gather

On board processor for real time mode and sink detection

When used with the Datapath range of graphics card, the CPU load is negligible even if the image is being upscaled to a video wall, resulting in real time performance

The VisionRGB-E2S captures data at a maximum pixel rate of 340 MHz. Once captured, the data is converted to either 555,
565 or 888 pixel and YUV modes display formats and then transferred over the PCI bus to host memory, for display on the desktop

HD capture for each channel up to 1080P at 60 frames per second, HDMI capture up to 1080p and DVI up to 1920x1200

Dynamic input source selection

Administrator mode

Update indicator

The VisionRGB-E2S application program is also built into the Datapath WallControl-red video wall software

VisionSD4+1S

Four channel SD Video + one channel RGB/DVI/HD video capture card

Four lane PCI Express interface with a maximum data rate of 650 MB/s for the VisionSD4+1S compared to the VisionSD4+1 at 480 MB/s

Maximum analogue RGB capture resolution of 2048x1536x24bit

Maximum DVI capture resolution of 1920x1200 x24bit

HD modes using the supplied DVI/ Component Adapter or DVI/HDMI Adapter (HDCP not supported)

Four SD capture channels for PAL/NTSC, SECAM (composite or S-Video inputs)

On card processor for real time mode and sync detection

Support for multiple cards allowing up to 128 SD capture channels + 32 DVI-I capture channels (32 cards)

Direct DMA driver software and streaming driver

High quality down scaling

Support for YUV 4:2:2, RGB 5:5:5, 5:6:5 and 8:8:8 video formats

High performance DMA to system memory or direct to graphics memory with scatter gather

Support for separate H/V sink, Composite sink or sink on Green

Includes WDM streaming drivers and the Datapath Vision application software

Fully integrated with the Datapath WallControl-red video wall software

Support for Windows® XP / Vista / Server 2003 / Server 2008 / Windows® 7 / Windows® 8 / Linux (NOTE: Check Linux specific features with Sales)

Datapath SDK included for software developers

VisionDVI-DL

Single channel PCI Express four lane bus with maximum data rate of 650 MB/s, allowing high resolution sources to be displayed at full frame rate

Support for 330 MHz pixel clock and a maximum canvas of 4k x 4k

HD video capture for all progressive and interlaced DVI/HDMI modes

Captures Quad HD (2160p) Digital Cinema modes at 24/25/30 fps

128 MB on board frame buffer

Input equalization supporting longer input cables

High performance DMA to system memory or direct to graphics memory with scatter gather high quality scaling (7x3 Polyphase filter)

VisionSDI2

Dual channel PCI Express 3G/HD/SD capture card

Four lane PCI Express bus with maximum data rate of 650 MB/s

Support for all 3G/HD/SD video modes up to 1080p 60 Hz

Loop through SDI BNC connections

64 MB per channel, total 128 MB on board frame buffer

On board processor for real time mode and sync detection

Audio output for each channel to an onboard SPDIF header (use with the Datapath Audio Output Module)

High performance DMA to system memory or direct to graphics memory with scatter gather

High quality scaling (7x5 Polyphase Filter)

Input status indicator lights

Long range, single co-ax cable support. (150metres capturing 1080p, 300 metres capturing SD)

16 cropping windows per capture channel

WallControl-red support and SDK

VisionSD8

High performance DMA to system memory or direct graphics memory with scatter gather

On board processor for real time mode and sync detection

Support for all PAL, NTSC, SECAM or S-Video video modes

When used with Datapath range of graphics card, the CPU load is negligible even if the image is being upscaled to a video wall, resulting in real time performance

Dynamic input source selection

Adjustments for colour, brightness and contrast

The vision application program is also built into the Datapath WallControl-red video wall software